Chapter 8 localization, 1 ntp settings, 2 country code settings – PLANET WAP-8000 User Manual
Page 26
Advertising
Chapter 8 Localization
8.1 NTP Settings
This page is used to configure NTP client to get current time.
8.2 Country Code Settings
The country code can be selected here to fit the local restriction law. Changing
country code will cause the available channel changes.
**Be notice, when select:
ETSI (1), the RF output power supports options: Full, 1/2, 1/4, 1/8, 1/16
ETSI (2), the RF output power supports options: Full, 1/2, 1/4
26
Advertising