PLANET WNAP-7335 User Manual
Page 86
Advertising
User Manual of WNAP-7325/WNAP-7335
-85-
Step 10. In AP-1, go to “Device Status-> Wireless Client Table” to check whether AP-2 should be in the list.
Step 11. Use command line tool to ping each other to ensure the link is successfully established.
From Site-1, ping 192.168.1.200; and in Site-2, ping 192.168.1.100.
Step 12. Configure the TCP/IP settings of Site-2 to “Obtain an IP address automatically”.
Advertising