PLANET WNL-U554A - Manual (Page 46)

150Mbps 802.11n Wireless USB Adapte r
WNL‐U554A
‐ 46 ‐
5.1 Switch between Access Point Mode and Station Mode
The default operating mode of the wireless adapter is “Station Mode” (being a client of other wireless
access points).
Please follow the instructions below to switch to Access Point mode:
Step 1. Right-click PLANET wireless utility icon, and click “Open Config Utility”.
Step 2. Select “Mode(M)”, and then click “Access Point”.
It requires a few seconds to go to switch mode. After the mode switch is complete, the window of
general information about software access point will appear, including SSID and connected wireless
clients.