PLANET WNRT-632 - Manual (Page 22)

This option is primary to enable this product to work properly. The setting items and the web appearance
depend on the WAN type. Choose correct WAN type before you start.
1. LAN IP Address: the local IP address of this device. The computers on your network must use the
LAN IP address of your product as their Default Gateway. You can change it if necessary.
2. WAN Type: WAN connection type of your ISP. You can click Change button to choose a correct one
from the following four options:
A. Static IP Address: ISP assigns you a static IP address.
B. Dynamic IP Address: Obtain an IP address from ISP automatically.
C. Dynamic IP Address: Telstra BigPond (Australia's ISP)
D. PPP over Ethernet: Some ISPs require the use of PPPoE to connect to their services.
E. PPTP: Some ISPs require the use of PPTP to connect to their services.
F. L2TP: Some ISPs require the use of L2TP to connect to their services
G. Russia PPPoE(Dual Access): Russia PPP over Ethernet(Dual Access) is a common connection
method used for XDSL.
H. Russia PPTP(Dual Access): Russia PPP Tunneling(Dual Access) can support multi-protocol
Virtual Private Network(VPN).
Static IP Address: ISP assigns you a static IP address:
WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS: enter the proper setting provided
by your ISP.
Dynamic IP Address: Obtain an IP address from ISP automatically.
Host Name: optional. Required by some ISPs, for example, @Home.
Renew IP Forever: this feature enables this product to renew your IP address automatically when the lease
time is expiring-- even when the system is idle.
22