PLANET WNRT-632 - Manual (Page 23)

PPP over Ethernet: Some ISPs require the use of PPPoE to connect to their services.
PPPoE Account and Password: the account and password your ISP assigned to you. For security, this field
appears blank. If you don't want to change the password, leave it empty.
PPPoE Service Name: optional. Input the service name if your ISP requires it. Otherwise, leave it blank.
Maximum Idle Time: the amount of time of inactivity before disconnecting your PPPoE session.
Set it to zero or enable Auto-reconnect to disable this feature.
Maximum Transmission Unit (MTU): Most ISP offers MTU value to users. The most common MTU value is
1492.
Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing packets.
Auto-Reconnect (Always-on): The device will link with ISP until the connection is established.
Manually: The device will not make the link until someone clicks the connect-button in the Status-page.
PPTP: Some ISPs require the use of PPTP to connect to their services
First, please check your ISP assigned and Select Static IP Address or Dynamic IP Address.
My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned to you.
Server IP Address: the IP address of the PPTP server.
PPTP Account and Password: the account and password your ISP assigned to you. If you don't want to
change the password, keep it empty.
Connection ID: optional. Input the connection ID if your ISP requires it.
Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to zero or enable
Auto-reconnect to disable this feature. If Auto-reconnect is enabled, this product will connect to ISP
automatically, after system is restarted or connection is dropped.
Connection Control: There are 3 modes to select:
Connect-on-demand: The device will link up with ISP when the clients send outgoing packets.
Auto-Reconnect (Always-on): The device will link with ISP until the connection is established.
Manually: The device will not make the link until someone clicks the connect-button in the Status-page.
L2TP: Some ISPs require the use of L2TP to connect to their services
First, please check your ISP assigned and Select Static IP Address or Dynamic IP Address.
For example: Use Static
My IP Address and My Subnet Mask: the private IP address and subnet mask your ISP assigned to you.
Server IP Address: the IP address of the PPTP server.
PPTP Account and Password: the account and password your ISP assigned to you. If you don't want to
change the password, keep it empty.
Connection ID: optional. Input the connection ID if your ISP requires it.
Maximum Idle Time: the time of no activity to disconnect your PPTP session. Set it to zero or enable
23