PLANET WNRT-632 - Manual (Page 36)

2.3.3.1 Packet Filters
Packet Filter enables you to control what packets are allowed to pass the router. Outbound filter applies on
all outbound packets. However, Inbound filter applies on packets that destined to Virtual Servers or DMZ
host only. You can select one of the two filtering policies:
1. Allow all to pass except those match the specified rules
2. Deny all to pass except those match the specified rules
You can specify 8 rules for each direction: inbound or outbound. For each rule, you can define the
following:
 Source IP address
 Source port address
 Destination IP address
 Destination port address
 Protocol: TCP or UDP or both.
 Use
Rule#
36