Chapter 2. hardware installation, 1 hardware description, The front panel – PLANET WPG-130N User Manual
Page 10: The rear panel, Chapter 2, Hardware installation
PLANET 802.11n Pocket Presentation Gateway
10
Chapter 2. Hardware Installation
Please follow the instructions below to build the wireless network connection between WPG-130N, display equipment and
your computers.
2.1 Hardware Description
2.1.1. The Front Panel
The front panel provides a simple interface monitoring the wireless presentation gateway.
Figure 2-1
shows
the front panel of WPG-130N.
Front Panel
Figure 2-1 The WPG-130N Front Panel
If you want to abandon the existing configuration and reset the WPG-130N to the factory default
settings, please press the reset button continuously and then power on the WPG-130N. After the
LED changes form red light to green, you can release the reset button to finish the procedures of
resetting to default.
2.1.2. The Rear Panel
Rear Panel
Figure 2-2 The WPG-130N Rear Panel