PLANET WRT-415 - Manual (Page 30)

- 24 -
If IP Filters is selected in the Filter Type field, the screen appears as below.
This page enables you to define a minimum and maximum IP address range filter; all IP addresses falling
in the range are not allowed Internet access. The IP filter profiles are listed in the table at the bottom of
the page.
Note: When selecting items in the table at the bottom, click anywhere in the item. The line is
selected, and the fields automatically load the item's parameters, which you can edit.
Enable: Click to enable or disable the IP address filter.
Range Start: Type the minimum address for the IP range. IP addresses falling between this value and
the Range End are not allowed to access the Internet.
Range End: Type the minimum address for the IP range. IP addresses falling between this value and the
Range Start are not allowed to access the Internet.
Add: Click to add the IP range to the table at the bottom of the screen.
Update: Click to update information for the range if you have selected a list item and have made
changes.
Delete: Select a list item and click “Delete” to remove the item from the list.
Clear: Click “Clear” to erase all fields and enter new information.
Select Domain Blocking, and the following screen appear.