PLANET HDVR-1600 - Manual (Page 4)


1 USB 2.0 Port
The USB 2.0 port allows users to connect an external USB device
to the unit, such as a USB Thumb Drive© or a USB mouse.
2 Channels
1. In Live and Playback modes, press any key to view the
corresponding video in full-screen.
2. In input interface, 1~10 can be used for direct input of
numbers 0~9.
3. In Dome Camera Control mode, 1 is for entering the Set/ Go
preset menu; 2 is for hiding or displaying the dome setting
parameters; 11~16 is for quick access of preset points 1~6.
3 Power LED It lights up when power source is connected.
4 Network LED
It lights up when network is connected. In addition, it blinks when
data is being transmitted via the network.
5 Alarm LED It lights up when an alarm is triggered.
6 Record LED It blinks when videos are being recorded.
7 HDD LED
It lights up when data is processed to or from the connected
HDD(s).
8 MODE Press this key to view in full-screen or multiple window modes.
9 PLAY/STOP
Press once to start the playback of recorded video. Press again to
exit.
10 FREEZE Press this key to freeze the current viewing screen.
11 SEQ Press this key to start automatic sequence display of cameras.
12 ESC Press this key to cancel or exit from certain control mode.
13
Direction
Keys
1. In Zoom mode, these keys function as normal direction keys.
2. In the OSD setup menu, the direction keys are used to move
the cursor to previous or next fields. To change the value in
the selected field, press UP / DOWN keys.
14 ENTER
1. In OSD menu or selection interface, press these key to make
the selection or save settings.
2. In live full-screen viewing mode, press this key to view a 2×
zoom image; press it again to return.
15 Shuttle/Jog This is used to control playback operations.
16 DOME Press this key to enter Dome Camera Control mode.
17 CALL Press this key to control call monitor or 2nd main monitor.
18 COPY This key is used for marking time in quick video export function.
19 SEARCH Press this key to search recorded video by date/time or event.
20 MENU Press this key to enter the OSD setup menu.