PLANET HDVR-1600 - Manual (Page 5)


Rear Panel
1
Main Monitor
Audio Out A RCA connector is provided to output audio associated with the
main monitor.
2
Main Monitor
(BNC)
A BNC connector is provided for connecting to a main monitor.
3
Call Monitor
(BNC)
A BNC connector is provided for connecting to a call monitor.
4 Video In (BNC)
A group of BNC connectors is offered for video input streams
from installed cameras. The number of connectors equals to the
number of channels.
5
Video Out
(BNC) The same amount of BNC connectors underneath Video IN
(BNC) is offered for looping out the video input.
6
Main Monitor
(S-Video) An S-Video connector is provided for connecting to a main
monitor.
7 Audio In
The DVR provides audio in connectors (a terminal block) for
each channel to connect its individual audio source device.
8
Main Monitor
(Digital Output)
A digital output connector is provided for connection to a
displaying device that transfers data digitally to show the best
video quality.
9
Main Monitor
(VGA) A VGA output connector is offered for connecting to a VGA main
monitor.
10
Alarm I/O &
RS-485 The DVR provides alarm I/O and RS-485 ports that offer users
the flexibility required to connect the unit to other devices.
11
NAS Device
(*1)
The NAS connector allows users to connect to a Network-
Attached Storage (NAS) device to expand HDD capacity of the
DVR.
12
USB 2.0 Ports
(×2)
Two USB 2.0 ports are located on the rear panel for users to
connect external USB devices to the unit, such as ThumbDrive®
or a USB mouse.