JVC DLA-Z1 - Manual (Page 40)

Reducing the After-image of Fast-moving Images (Blur Reduction)
Low Latency
For changing the low latency setting.
You are recommended to set to “On” for content requiring split-second timing with the operation screen of PC signals
or games.
1
Press the [MENU] button to display the menu and select “Picture Adjust”"“Blur
Reduction”"“Low Latency”
Setting Description
On Performs the low latency setting.
Off Does not perform the low latency setting.
* “Clear Motion Drive” cannot be set when “Low Latency” is set to “On”.
Clear Motion Drive (C.M.D.)
Optimal interpolation according to the content is made possible with the new high-definition image interpolation
technique that supports 3D images.
For some scenes, interpolation may cause distortion in the image that supports 3D images. In this case, set to “Off”.
.
Intermediate Frame Generation Intermediate Frame Generation
Interpolation Enabled
Original Image
1 Press the [C.M.D.] button
0
Pressing the [C.M.D.] button each time switches the mode in the following
sequence: “Off”"“Low”"“High”"“Inverse Telecine”"“Off”...
Setting Description
Off Interpolation is not performed.
Low Improves motion lag for movie type images.
High Improves motion lag fast moving sports type images.
Inverse Telecine 60i/60p video images such as those of TVs and DVDs.
Suitable for original images that are 24-frame film sources.
0
Does not function for 24p video images.
* C.M.D. is the abbreviation for Clear Motion Drive.
* This item cannot be set when “Low Latency” is set to “On”.
HDR
C.M.D.
COLOR
PROFILE
GAMMA
SETTINGS
PICTURE
MODE
40
Adjust/Set