Canon PowerShot SX410 IS - Manual (Page 112)

112
ç Contents
● If faces are not detected, or when only gray frames are displayed
(without a white frame), up to nine green frames are displayed in
the areas in focus when you press the shutter button halfway.
● If faces are not detected when Servo AF (= 114) is set to [On],
the AF frame is displayed in the center of the screen when you
press the shutter button halfway.
● Examples of faces that cannot be detected:
- Subjects that are distant or extremely close
- Subjects that are dark or light
- Faces in profile, at an angle, or partly hidden
● The camera may misinterpret non-human subjects as faces.
● No AF frames are displayed if the camera cannot focus when you
press the shutter button halfway.
Choosing Subjects to Focus On (Tracking AF)
Still Images Movies
Shoot after choosing a subject to focus on as follows.
1
Choose [Tracking AF].
● Follow the steps in “Changing
the AF Frame Mode” (= 110) to
choose [Tracking AF].
● [ ] is displayed in the center of the
screen.