Changing the focus setting, Changing the focus, Setting – Canon PowerShot SX410 IS User Manual
Page 115
115
ç
Contents
●
Focusing may not be possible in some shooting conditions.
●
In low-light conditions, Servo AF may not be activated (AF frames
may not turn blue) when you press the shutter button halfway.
In this case, the focus and exposure are set according to the
specified AF frame mode.
●
If adequate exposure cannot be obtained, shutter speeds and
aperture values are displayed in orange. Release the shutter
button, and then press it halfway again.
●
AF lock shooting is not available.
●
[AF-Point Zoom] on the [
] tab (= 49) is not available.
●
Not available when using the self-timer (= 66).
Changing the Focus Setting
Still Images
Movies
You can change default camera operation of constantly focusing
on subjects it is aimed at, even when the shutter button is not
pressed. Instead, you can limit camera focusing to the moment
you press the shutter button halfway.
●
Press the [
] button,
choose [Continuous AF] on the
[ ] tab, and then choose [Off]