Çcontents – Canon PowerShot SX410 IS User Manual
Page 96
Advertising
96
ç
Contents
●
On-screen image brightness in step 3, when you pressed the
shutter button halfway, may not match the brightness of your
shots.
●
With shutter speeds of 1.3 seconds or slower, there will be a
delay before you can shoot again, as the camera processes
images to reduce noise.
●
Set [IS Mode] to [Off] when using a tripod or other means to
secure the camera (= 121).
●
If the flash fires, your shot may be overexposed. In this case, set
the flash to [ ] and shoot again (= 117).
Advertising