Canon PowerShot SX410 IS - Manual (Page 25)

25
ç Contents
Initial Preparations
Prepare for shooting as follows.
Attaching Accessories
1
Attach the strap.
● Thread the end of the strap
through the strap hole (1), and
then pull the other end of the
strap through the loop on the
threaded end (2).
2
Attach the lens cap.
● Remove the lens cap from the
lens momentarily, thread the end
of the strap through the strap hole
(1), and then pull the lens cap
through the loop (2).
● Always remove the lens cap
before turning the camera on.
● Keep the lens cap on the lens
when the camera is not in use.
(2)
(1)
(1) (2)