Canon PowerShot SX410 IS - Manual (Page 213)

213
ç Contents
Display on a TV
Camera images look distorted or not displayed on a TV (= 182).
Shooting
Cannot shoot.
● In Playback mode (= 123), press the shutter button halfway (= 45).
Strange display on the screen under low light (= 46).
Strange display on the screen when shooting.
● Note that the following display problems are not recorded in still images
but are recorded in movies.
- The screen may darken under bright light.
- The screen may flicker under fluorescent or LED lighting.
- Purplish banding may appear on the screen if you compose a shot
that includes a bright light source.
No date stamp is added to images.
● Configure the [Date Stamp ] setting (= 31). Note that date stamps
are not added to images automatically, merely because you have
configured the [Date/Time] setting (= 69).
● Date stamps are not added in shooting modes (= 230) in which this
setting cannot be configured (= 69).
[ ] flashes on the screen when the shutter button is pressed, and
shooting is not possible (= 58).
[ ] is displayed when the shutter button is pressed halfway (= 58).
● Set [IS Mode] to [Continuous] (= 121).
● Raise the flash and set the flash mode to [ ] (= 117).
● Increase the ISO speed (= 102).
● Mount the camera on a tripod or take other measures to keep it still.
Additionally, you should set [IS Mode] to [Off] when using a tripod or
other means to secure the camera (= 121).