Canon PowerShot SX410 IS - Manual (Page 139)

139
ç Contents
2
Choose an image.
● Press the [ ][ ] buttons to
choose an image, and then press
the [ ] button. [ ] is displayed.
● To cancel selection, press the [ ]
button again. [ ] is no longer
displayed.
● Repeat this process to specify
other images.
3
Protect the image.
● Press the [ ] button.
A confirmation message is
displayed.
● Press the [ ][ ] buttons to
choose [OK], and then press the
[ ] button.
● Images will not be protected if you switch to Shooting mode or
turn the camera off before finishing the setup process in step 3.
Selecting a Range
1
Choose [Select Range].
● Following step 2 in “Using the
Menu” (= 138), choose [Select
Range] and press the [ ] button.