Check the picture you have taken – Panasonic Lumix GX80 User Manual

Page 19

Advertising
background image

Preparation/Basic “Quick Start Guide”

19

(ENG) SQT1310

2

Press the shutter button halfway to focus.

A Aperture value
B Shutter speed
C Focus indication

•

Aperture value and shutter speed are displayed.
(It will flash in red if the correct exposure is not
achieved, except when set to flash.)

•

Once the subject is in focus, the focus indication is
displayed. (When the subject is not in focus, the
indication flashes.)

3

Press the shutter button fully (push it in
further), and take the picture.

•

Be careful not to move the camera when you press the shutter button.

•

When the image is correctly focused, the picture will be taken, since the [Focus/
Release Priority] is set initially to [FOCUS].

∫ Adjust the angle of the monitor
•

Be careful not to catch your finger, etc. in the monitor.

•

When adjusting the angle of the monitor, be careful not to
apply too much force, as this may cause damage or
malfunction.

•

When not using this unit, close the monitor completely back to the
original position.

•

Return the monitor to its original position when attaching a tripod/
monopod.

•

Use of a tripod/monopod may limit the maximum angle to which
the monitor can be adjusted, depending on the type of the tripod/
monopod.

•

The [Auto Review] function displays the picture you have
just taken.

•

To display the picture in Playback Mode, press [(].

11

Check the picture you have taken

60

60

60

3.5

3.5

3.5

A B

C

1/98

1/98

1/98

1/98

DMC-GX85KBody_PP-SQT1310_eng.book 19 ページ 2016年3月25日 金曜日 午後5時13分

Advertising