Nikon D5500 - Manual (Page 185)

161 P, S, A, and M Modes
Sharing Custom Picture Controls
Custom Picture Controls created using Picture Control Utility 2, a
utility launched from ViewNX 2 or Capture NX-D (
0 210), can be
copied to a memory card and loaded into the camera, or custom
Picture Controls created with the camera can be copied to the
memory card to be used in compatible cameras and software
and then deleted when no longer needed.
To copy custom Picture Controls to or
from the memory card, or to delete
custom Picture Controls from the
memory card, highlight Load/Save in
the Manage Picture Control menu and
press
2. The following options will be
displayed:
• Copy to camera: Copy custom Picture
Controls from the memory card to
custom Picture Controls C-1 through
C-9 on the camera and name them as
desired.
• Delete from card: Delete selected custom
Picture Controls from the memory card.
• Copy to card: Copy a custom Picture Control (C-1 through C-9)
from the camera to a selected destination (1 through 99) on
the memory card.
A
Saving Custom Picture Controls
Up to 99 custom Picture Controls can be stored on the memory card at
any one time. The memory card can only be used to store user-created
custom Picture Controls. The preset Picture Controls supplied with the
camera can not be copied to the memory card, renamed, or deleted.