Philips AVENT SCF922 - Manual (Page 7)

9 ENGLISH
Overview (Fig. 1)
a Lid
b Small basket
c Big basket
d Heating plate
e Base
f Power-on indicator
g Power-on button “I”
h Power-off button “O”
i Mains cord
Before first use (Fig. 2)
When you use the appliance for the first time, we advise you to let it complete one
sterilisation process with empty baskets.
1
Use a baby bottle and pour 90ml/3 fluid oz purified water or tap water
directly into the heating plate. (Fig. 2-1)
2
Place the big basket on the base. Adjust the position of the big basket so
that it fits properly on the base. (Fig. 2-2)
3
Place the small basket in the big basket. Adjust the position of the small
basket so that it fits properly in the big basket. (Fig. 2-3)
4
Place the lid on top of the small basket. Adjust the position of the lid so that
it fits properly on the small basket. (Fig. 2-4)
5
Put the plug in the wall socket. (Fig. 2-5)
6
Press the power-on button to switch on the appliance. (Fig. 2-6)
» The power-on indicator lights up to indicate that the appliance starts
operating.
» A sterilising cycle takes around 10 minutes (Fig. 2-7). When the
sterilisation process is finished, the power-on indicator goes out and the
appliance switches off automatically.
7
Unplug the appliance (Fig. 2-8). Wait until the appliance has cooled down
completely (Fig. 2-9), and then remove the lid, the small basket and the big
basket, and wipe them dry.
Note
• The appliance does not work for about 10 minutes after a sterilising cycle, it
needs to cool down first.