Yaskawa MP900 Series MPLOGGER - Manual (Page 106)

9 Communication Manager Settings
9-4
9.2 Serial (MEMOBUS) Communications Settings
To connect MPLOGGER and a controller with serial communications (MEMOBUS protocol),
the RS-232 communications port (COM port) and Communication Manager must be set up.
This section describes how to set up serial communications with the MEMOBUS protocol after
the Communication Manager has been started.
1. Logical Port Selection
Select a logical port in the Communication Manager Window.
(Double-click the number (1 to 16) of the desired logical port. Port 1 is selected in the
following example.)
2. Logical Port Settings
When a logical port is selected, the Logical Port Setting Dialog Box will appear.