Yaskawa MP900 Series MPLOGGER - Manual (Page 111)

9.3 CP-218 (Ethernet) Communications Setting
9-9
9
6. IP Address Selection
Select an IP address for the first port from the IP Address (First) Box in the CP-218
Port Setting Dialog Box. The default IP address and the actual IP address will both be
displayed. Select the actual IP address that is being used.
(The default setting of 192.168.1.2 is selected in this example.)
7. IP Address Confirmation
When an IP address has been selected, it will be displayed in IP Address (First) Box as
shown below.