Yaskawa MP900 Series MPLOGGER - Manual (Page 52)

4 Basic Operation
4.7.2 Read Cells
4-22
„ Block Setup
If cells from A4 to C5 are selected with the register set to MW1000 and a block size of 3 set to expand
to the right, the following addresses will be assigned to each cell.
If cells from A4 to C5 are selected with the register set to MW1000 and a block size of 2 set to expand
downward, the following addresses will be assigned to each cell.
The cell settings give priority to the block size over the selected area. If cells from A4 to C5 are
selected with the register set to MW1000 and a block size of 5 set to expand downward, the actual cell
setting will be from A4 to C8.
• To modify the settings for cells that have already been set, such as to change the register type or
the reference number, right-click the desired cell to open the Cell Setting Dialog Box. The current
settings will be displayed in the dialog box. Make the desired changes and click the OK Button to
save them. Only one cell can be modified at a time.
• Deleting a Cell with Settings
Select the cell that you want to delete, and then open the Cell Setting Dialog Box. The current cell
settings will be displayed. Check the content and click the Delete Button.
To delete multiple cells at the same time, right-click the desired cells and select Delete Setting of
Selected Cells from the pop-up menu.
• Changing the data format to hexadecimal will convert the display format to text. Be careful
because most Excel calculation functions do not support data in hexadecimal format.
EXAMPLE
The addresses are incremented
to the right.
The addresses are incremented
to the downward.
INFO