Yaskawa MP900 Series MPLOGGER - Manual (Page 42)

4 Basic Operation
4.6.1 Controller Setting Dialog Box
4-12
4.6 Controller Settings
Once the communications driver has been set up, continue with the controller settings.
The controller settings are used to register the controllers connected to each communications
driver port. Names can be assigned to each controller.
Use the connection diagnosis function to check the controller connection status. For details,
refer to
4.6.2 Connection Diagnosis .
4.6.1 Controller Setting Dialog Box
1. Select PLC - Assign Controller - YASKAWA Assign Controller .
2. The Controller Setting Dialog Box will be displayed.
This section depends on the selected communications