Yaskawa MP900 Series MPLOGGER - Manual (Page 109)

9.3 CP-218 (Ethernet) Communications Setting
9-7
9
9.3 CP-218 (Ethernet) Communications Setting
To connect MPLOGGER and a controller with Ethernet communications (MEMOBUS proto-
col), the personal computer Ethernet communications port, controller CP-218 communications
port, and Communication Manager must be set up. This section describes how to set up CP-218
communications with the MEMOBUS protocol after the Communication Manager has been
started.
1. Logical Port Selection
Select a logical port in the Communication Manager Window.
(Double-click the number (1 to 16) of the desired logical port. Port 2 is selected in the
following example.)
2. Logical Port Settings
When a logical port is selected, the Logical Port Setting Dialog Box will appear.