Rear panel (connecting the external equipment), Rear panel, Panel descriptions – Roland Fantom-08 88-Key Music Workstation Keyboard User Manual

Page 10: Connecting the external equipment)

Advertising
background image

Panel Descriptions

10

A

PEDAL jacks

Controller

Explanation

HOLD jack

If you connect a pedal switch (DP series, sold

separately) to this jack, you can use it as a

damper pedal.

CTRL2 jack

You can also assign various functions to the

pedals that are connected to the CTRL 1 and

CTRL 2 jacks.

CTRL1 jack

* Use only the specified expression pedal. By connecting any other

expression pedals, you risk causing malfunction and/or damage

to the unit.

B

MIDI connectors

Controller

Explanation

MIDI OUT connector

MIDI IN connector

Transmit or receive MIDI messages to or from

an external MIDI device connected here.

C

USB port

Controller

Explanation

USB EXT DEVICE jack

Connect this to an external USB device.

USB COMPUTER port

Connect this to your computer to transfer

performance data and audio signals.

USB MEMORY port

Use a commercially available USB flash drive.

However, we cannot guarantee that all

commercially available USB flash drives will

work.

D

MIC/LINE INPUT jacks

Controller

Explanation

LEVEL knob

Adjusts the input level of

the MIC INPUT jack.

MIN

MAX

MIC jack

Connect your microphone here.

R, L/MONO jacks

Connect your audio device, external

synthesizer or other equipment to these jacks.

E

SUB OUT jacks

Controller

Explanation

R, L/MONO jacks

These are output jacks for sub-out audio.

STEREO (PHONES) jack

The SUB OUT audio signal is output in stereo.
You can also connect a pair of headphones

here with a stereo mini plug. When doing so,

set the volume from the MIXER screen, and

the source you want to hear from the OUTPUT

screen.

F

MAIN OUT jacks

Controller

Explanation

R, L/MONO jacks

(Balanced)

These are balanced output jacks for audio

signals. Connect them to your mixer.

* Pin assignment of MAIN OUT jack

1: GND

2: HOT

3: COLD

1: GND

2: HOT

3: COLD

TIP: HOT

RING: COLD

SLEEVE: GND

Rear Panel

(Connecting the External Equipment)

* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.

AC adaptor

(included)

B

H

I

J K

A

PEDAL

Expression pedal (EV-5)

or

Pedal switch (DP series)

Pedal unit

(RPU-3)

C

USB

D

MIC/LINE INPUT

E

SUB OUT

F

MAIN OUT

G

PHONES jack

Computer

USB flash drive

to AC outlet

AC Adaptor

Mixer

Monitor speaker

(built-in amplifier)

Headphones

Dynamic

Microphone

Audio

equipment

* Use the cord hook to secure

the cord of the AC adaptor as

shown in the illustration.

Advertising