Roland Fantom-08 88-Key Music Workstation Keyboard - Manual (Page 7)

Placing This Unit on a Stand
7
If You’re Using the FANTOM-08
If you want to place the FANTOM-08 on a stand, please use the KS-12, KS-10Z, KS-G8B, or KS-20X stands manufactured by Roland.
KS-10Z
Adjust so that the
height does not
exceed 1 meter.
Adjust the width of the stand so that the
stand arms are lined up between the
rubber feet of the FANTOM.
Top view
Align the front
of the FANTOM
with the front of
the stand
KS-12
Adjust the horizontal width of the
stand so that the rubber feet on the
keyboard side of the FANTOM fit
into the holes that are provided to
accommodate them.
Top view
KS-G8B
Align the front of the
FANTOM with the
front of the stand’s
upper arm.
Align the center of the FANTOM
with the center of the stand.
KS-20X
Line up the FANTOM
so that it rests on the
rubber rings of the
stand.
Open up the stand from closed position past
the fourth stop (with the first stop being the
closed position, and the fifth stop being the
fully open position).