Roland P-20HD Video Instant Replayer - Manual (Page 25)

25
Pad Operations
Using the Palettes
On the P-20HD, you can register the clips you have created in eight different palettes and categorize the clips by player, scene and so on according
to your tastes.
You can also play back the clip list and clips arranged in a palette in series (This is the playlist playback feature).
Further, you can play back highlights during an event or an ending.
Registering a Clip to a Palette
1 . Press the [CLIP LIST] button
2 . Use the [VALUE] knob or press the pads to select
the clip you want to register, and press the [VALUE]
knob.
The CLIP MENU screen appears.
3 . Select “Add to PALETTE,” and press the [VALUE]
knob.
The [PALETTE] button and pads [1]–[8] blink.
4 . Press the same pad number as the palette to which
you want to register (for example, press pad [3] to
register to palette 3).
5 . Select “OK,” and press the [VALUE] knob.
The clips are now registered in the palette.
6 . Hold down the [PALETTE] button and press the pad
you pressed in step 4.
The palette switches to the one in which you just registered the
clip.
MEMO
The operation for playing back clips in the PALETTE screen is the
same as with the CLIP LIST screen.
Selecting a Palette
1 . Hold down the [PALETTE] button and press pads
[1]–[8].
The palette corresponding to the pad you pressed is selected.
* If you press only the [PALETTE] button, the palette that was last
displayed is selected.
* If you hold down just the [PALETTE] button, the pad
corresponding to the selected palette number lights up. Also,
the number of the selected palette is shown in the palette tab
onscreen.
Playing Back a Playlist
1 . Hold down the [PALETTE] button and press pads
[1]–[8] to display the PALETTE screen.
2 . Press the AUTO PLAY [PLAYLIST] button.
The clips in the selected palette play back in series, from the first
registered clip to the last.
As with the playback of clips, clips are played back by switching
the output to the replay side.
When the last clip finishes playing back, the OUTPUT videos
automatically return to how they were (LIVE IN and REPLAY) prior
to playback.
NOTE
You can’t use the [SPEED] lever or [JOG/SHUTTLE] dial to change
the playback speed (with the lever, jog or shuttle operations)
when playing back a playlist.