Roland AIRA TR-6S Rhythm Performer - Manual (Page 22)

22
Looping a Specific Step
(STEP LOOP)
While a pattern is playing back, you can make the selected step play
as a loop.
All instruments sounded by the selected step play as a loop.
1 Press the [START/STOP] button to play the pattern.
2 Press the [STEP LOOP] button.
The [STEP LOOP] button lit, and the unit is in step loop mode.
3 Press the pad [1] – [16] of the step that you want to
loop.
The selected step begins looping.
When you take your finger off the pad [1]–[16], you return to
pattern playback.
Holding the Loop Playback
You can make a step’s loop playback continue even after you release
your finger.
1 While holding down either the [STEP LOOP] button
or one of the instrument select buttons [BD] – [OH] ,
press a pad [1] – [16] .
The loop playback continues even after you release your finger.
2 To cancel looping, press the [STEP LOOP] button or
one of the pads.
To Cancel Step Loop Mode
Press any one of the [PTN SELECT], [TR-REC], [INST REC], or
[VARIATION] buttons.