Solutions to projector power or shut-off problems – Epson Home Cinema PRO-UHD 5050UB HDR Pixel-Shift 4K UHD 3LCD Home Theater Projector User Manual
Page 159
![background image](/files/868826/content/doc159.png)
159
• Make sure the HDMI cable between the source and the WirelessHD transmitter conforms to HDMI
standards.
Parent topic:
Related references
Solving Projector or Remote Control Operation Problems
Check the solutions in these sections if you have problems operating the projector or remote control.
Solutions to Projector Power or Shut-Off Problems
Solutions to Problems with the Remote Control
Solutions to Panel Alignment Problems
Solutions When Using HDMI Link
Parent topic:
Solutions to Projector Power or Shut-Off Problems
If the projector does not come on when you press the power button or it shuts off unexpectedly, try the
following solutions:
• Make sure the power cord is securely connected to the projector and to a working electrical outlet.
• The projector's buttons may be locked for security. Unlock the buttons or use the remote control to
turn on the projector.
• If the projector's lamp shuts off unexpectedly, it may have entered standby mode after a period of
inactivity. Press the power button to wake the projector and adjust the
Sleep Mode Timer
setting to
change the sleep interval.
• Turn off the
HDMI Link
setting. If this resolves the issue, check the settings on connected devices and
make sure the projector is not receiving shut down requests over CEC.
• If the power button on the remote control does not turn on the projector, check its batteries and make
sure the
Remote Receiver
setting is turned on in the projector's menu, if available.
• The power cord may be defective. Try another power cord. If that doesn't work, disconnect the cord
and contact Epson.
• Make sure the lamp and lamp cover are installed correctly.
Parent topic: