Epson Home Cinema PRO-UHD 5050UB HDR Pixel-Shift 4K UHD 3LCD Home Theater Projector User Manual
Page 89
89
Note:
You can adjust only the red or blue color convergence. Green is the standard color panel and
cannot be adjusted.
Note:
Allow your projector to warm up for at least 10 to 15 minutes and make sure the image is in focus
before you use the Panel Alignment feature. For best results, project an image sized at least 60 inches
(152 cm) diagonally in a dark room and on a projection surface that is not colored or textured.
1.
Turn on the projector.
2.
Press the
Menu
button.
3.
Select the
Extended
menu and press
Enter
.
4.
Select the
Display
setting and press
Enter
.
5.
Select the
Panel Alignment
setting and press
Enter
.
6.
Select the
Panel Alignment
setting and press
Enter
.
7.
Select
On
and press
Enter
.
8.
Select the
Select Color
setting and choose one of the following:
•
R
to adjust the red color convergence.
•
B
to adjust the blue color convergence.
9.
Select the
Pattern Color
setting and press
Enter
.
10. Select the pattern you want to use and press
Enter
.