Epson Home Cinema 1080 3400-Lumen Full HD 3LCD Projector - Manual (Page 166)

166
Power light Status light Lamp light Temp light Status and solution
Flashing blue Light status
varies Light status
varies Flashing
orange Projector is too hot
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• Make sure the environmental
temperature is not too hot
Off Flashing blue Off Orange Projector has overheated and
turned off; leave it turned off to cool
down for about five minutes, then
do the following:
• Make sure that the vents and air
filter are not clogged with dust or
obstructed by nearby objects
• Clean or replace the air filter
• If operating the projector at high
altitude, turn on High Altitude
Mode
• If the problem persists, unplug
the projector and contact Epson
for help