Epson Home Cinema 1080 3400-Lumen Full HD 3LCD Projector User Manual
Page 69
69
2.
Connect the power cord to the projector's power inlet.
3.
Plug the power cord into an electrical outlet.
Note:
With
Direct Power On
turned on, the projector turns on as soon as you plug it in.
The projector's power light turns blue. This indicates that the projector is receiving power.
4.
Press the power button on the projector or the remote control to turn on the projector.
The projector beeps and the Status light flashes blue as the projector warms up. Once the projector
is warmed up, the Status light stops flashing and turns blue.
Warning:
Never look into the projector lens when the lamp is on. This can damage your eyes and is
especially dangerous for children.
Caution:
Turning the power on and off frequently may shorten the lamp's operating life.
If you do not see a projected image right away, try the following:
• Verify the lens cover is open all the way.
• Turn on the connected computer or video device.