Epson Home Cinema 1080 3400-Lumen Full HD 3LCD Projector User Manual
Page 182
182
• Make sure you set up the projector e-mail alert settings correctly on the projector's network menu or in
the network software.
• Set the
Standby Mode
setting to
Communication On
so the network software can monitor the
projector in standby mode. Change the
Port
setting according to your network environment.
Parent topic:
Related references
Projector Setup Settings - ECO Menu
Related tasks
Setting Up Projector Network E-Mail Alerts
Solutions When You Cannot Connect Using Screen Mirroring
If you are unable to connect to the projector using Screen Mirroring (Home Cinema 1080), try the
following solutions:
• Select
On
as the
Screen Mirroring
setting in the projector's Network menu.
• Make sure the
Display Name
in the screen mirroring settings does not include "-" or it may not display
correctly on your mobile device.
• Make sure the
Operation Mode
and
Channel
settings are correct for your mobile environment and try
connecting again.
• Make sure no other mobile device is connected to the projector using
No Interruptions
settings in the
Extended
menu
Meeting Mode
settings.
• Make sure the mobile device settings are correct.
• You may not be able to connect immediately after disconnecting from the projector. Wait a while and
try connecting again.
• Restart the mobile device.
• If you have previously connected to the projector using Screen Mirroring, the device may have saved
the previous connection information. Delete the saved information and connect to the projector from
the list of available devices.
Parent topic:
Related references