Connecting to a video source for sound, Connecting to external speakers – Epson Home Cinema 1080 3400-Lumen Full HD 3LCD Projector User Manual
Page 37
37
Parent topic:
Connecting to a Video Source for Sound
You can play sound through the projector's speaker system if your video source has audio output ports
(Home Cinema 1080). Connect the projector to the video source using an RCA audio cable.
Note:
Make sure the audio cable is labeled "No Resistance."
Note:
If you connected your video source to the projector using an HDMI cable, the audio signal is
transferred with the video signal; you do not need an additional cable for sound.
1.
Connect the audio cable to your video source's audio-out ports.
2.
Connect the other end of the cable to the projector's
L
and
R
audio ports.
Parent topic:
Connecting to External Speakers
You can connect the projector to external self-powered speakers and control the volume using the
projector's remote control.
You can also connect the projector to an amplifier with speakers.
If you want to output audio from the external speakers when the projector is turned off, you need to
select
Always On
as the
A/V Output
setting in the projector's Extended menu.
Note:
The projector's built-in speaker system is disabled when you connect external speakers.