DJI Mini 2 SE Fly More Combo Drone User Manual

Page 23

Advertising

DJI MINI 2 SE

User Manual

Using the Battery

Checking Battery Level

Press the power button once to check the battery level.

LED1
LED2
LED3
LED4

Battery Level LEDs

Power Button

The battery level indicators display the power level of the flight battery during charging and
discharging. The statuses of the indicator are defined as follows:
LED is on. LED is flashing. LED is off.

LED1

LED2

LED3

LED4

Battery Level

battery level

88%

75%

battery level ≤

88%

63%

battery level ≤ 75%

50%

battery level ≤ 63%

38%

battery level ≤ 50%

25%

battery level ≤ 38%

13%

battery level ≤ 25%

battery level ≤ 13%

Powering On/Off

Press the power button once, then press again, and hold for two seconds to power the battery on or
off. The battery level LEDs display the battery level when the aircraft is powered on.
Press the power button once and the four battery level LEDs will blink for three seconds. If LED 3 and 4
blink simultaneously without pressing the power button, this indicates the battery is abnormal. Insert the
Intelligent Flight Battery again and make sure that it is securely mounted.

Low Temperature Notice

1. Battery capacity is significantly reduced when flying in low-temperature environments of 0° to 5° C (32°

to 41° F). It is recommended to hover the aircraft in place for a while to heat the battery. Make sure to
fully charge the battery before takeoff.

2. To ensure the optimal performance of the battery, keep the battery temperature above 20° C (68° F).
3. The reduced battery capacity in low-temperature environments reduces the wind speed resistance

performance of the aircraft. Fly with caution.

4. Fly with extra caution at high sea levels.

Advertising