DJI Mini 2 SE Fly More Combo Drone - Manual (Page 46)

© 2023 DJI All Rights Reserved. 45
DJI MINI 2 SE User Manual
It is important to understand the basic flight guidelines for the safety of both you
and those around you.
DO NOT forget to read the
safety guidelines .
Flight Test
Takeoff/Landing Procedures
1. Place the aircraft in an open, flat area with the aircraft status indicator facing towards you.
2. Power on the remote controller and the aircraft.
3. Launch DJI Fly, connect the mobile device to the aircraft, and enter the camera view.
4. Wait until the aircraft status indicator blinks green slowly to indicate that the Home Point has been
recorded and it is now safe to fly.
5. Gently push the throttle stick to take off or use auto-takeoff.
6. Pull the throttle stick or use auto-landing to land the aircraft.
7. After landing, push the throttle down and hold. The motors stop after three seconds.
8. Power off the aircraft before the remote controller.
Video Suggestions and Tips
1. The pre-flight checklist is designed to help you fly safely and to ensure that you can shoot video
during flight. Go through the full pre-flight checklist before each flight.
2. Select the desired gimbal operation mode in DJI Fly.
3. It is recommended to take photos or record videos when flying in Normal or Cine mode.
4. DO NOT fly in bad weather conditions such as when it is raining or windy.
5. Choose the camera settings that best suit your needs.
6. Perform flight tests to establish flight routes and to preview scenes.
7. Push the control sticks gently to keep the aircraft movement smooth and stable.