DJI Mini 2 SE Fly More Combo Drone - Manual (Page 8)

© 2023 DJI All Rights Reserved. 7
DJI MINI 2 SE User Manual
Preparing the Aircraft
All aircraft arms are folded before the aircraft is packaged. Follow the steps below to unfold the aircraft.
1. Remove the propeller holder.
2. Remove the gimbal protector from the camera.
3. In the following order, unfold the front arms, rear arms, and all the propellers.
It is recommended to install a gimbal protector to protect the gimbal and use a propeller holder to
secure the propellers when the aircraft is not in use.
The propeller holder and USB charger are only included in the combo package.
Unfold the front arms before unfolding the rear arms.
Make sure the gimbal protector is removed and all arms are unfolded before powering on the aircraft.
Otherwise, it may affect the aircraft self-diagnostics.
4. All Intelligent Flight Batteries are in hibernation mode before shipment to ensure safety. Use the USB
charger to charge and activate Intelligent Flight Batteries for the first time.