DJI Mini 2 SE Fly More Combo Drone - Manual (Page 45)

44 © 2023 DJI All Rights Reserved.
DJI MINI 2 SE User Manual
Stopping the Motors
There are two methods to stop the motors.
Method 1: when the aircraft has landed, push and hold the throttle stick down. The motors will stop
after three seconds.
Method 2: when the aircraft has landed, push the throttle stick down, and perform the same CSC that
was used to start the motors for 2 s. Release both sticks once the motors have stopped.
Starting/Stopping the Motors
Starting the Motors
A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the bottom inner
or outer corners to start the motors. Once the motors start spinning, release both sticks simultaneously.
OR
OR
Method 1 Method 2
If the motor is started unexpectedly, perform the same CSC to stop motors immediately.
Stopping the Motors Mid-Flight
The motors should only be stopped mid-flight in an emergency situation such as if a collision has
occurred or if the aircraft is out of control and is ascending or descending very quickly, rolling in
the air, or if a motor has stalled. To stop the motors mid-flight, use the same CSC that was used
to start the motors for 2 s. The default setting can be changed in DJI Fly.
Stopping motors mid-flight will cause the aircraft to crash.