Canon imageCLASS MF3010 VP Multifunction Monochrome Laser Printer - Manual (Page 169)

Copying Problems
85RS-03S
See the following sections.
The copy output is hardly readable and copied poorly.(P. 164)
The copy output is askew.(P. 164)
The copy output is hardly readable and copied poorly.
● The copy output is too light or has uneven density.
● Vertical white streaks appear on the copy output.
● The copy output has spots and is dirty.
● The copy output is askew.
● Toner does not fix onto paper well.
See the following section.
" The Copy Output is Hardly Readable and Copied Poorly(P. 165) "
The copy output is askew.
Make sure that the number of sheets or the paper type loaded in the paper cassette meets the paper
specifications.
" Supported Paper Types(P. 70) "
Adjust the paper guides to the paper width without space. If the problem persists, load paper with the
other side face up, or in an opposite orientation.
" Loading Paper(P. 46) "
Make sure that the output tray is not full.
Troubleshooting
164