Canon imageCLASS MF3010 VP Multifunction Monochrome Laser Printer - Manual (Page 63)

Upgrading Firmware
85RS-01E
This section describes the procedure to upgrade the printer firmware.
For details on the procedure for upgrading the firmware, see the manual supplied with the firmware.
IMPORTANT
Performing only when it is necessary
Upgrade the printer firmware only when it is necessary.
Operating results Operating procedures
Press [ ] (Menu setting key), and then start the menu
operation.
When the menu is operating, the menu indicator blinks.
Press [ ] or [ ] until "F" is displayed.
When [ ] is pressed, the update mode for the firmware is
displayed as shown below.
Basic Operation
58