Canon imageCLASS MF3010 VP Multifunction Monochrome Laser Printer - Manual (Page 187)

The Printout is Too Dark
85RS-04C
Try one of the following to solve the problem.
<Cause 1> The copy density setting specified is not appropriate.
Solution Adjust the <Density> or <Correct Density> to a lower level from the operation panel.
" Adjusting the Density(P. 79) "
<Cause 2> The machine is exposed to direct sunlight or strong light
Solution Relocate the machine.
" Relocating the Machine(P. 216) "
<Cause 3> The size of the paper loaded in the paper cassette does not match the
documents.
Solution Perform cleaning the fixing unit in <Special Mode C> using the operation panel.
" Special Mode(P. 213) "
" Cleaning the Fixing Unit(P. 198) "
Troubleshooting
182