FujiFilm X-S10 Mirrorless Camera - Manual (Page 117)

93
5
T
a
k
ing Phot
og
raphs
Continuous Shooting (Burst Mode)
Capture motion in a series of pictures.
1 Press the I (drive) button to dis-
play drive-mode menu and select CH
HIGH SPEED BURST or CL LOW SPEED
BURST .
2 Choose the frame advance rate and press the shutter button
to start shooting.
Shooting ends when the shutter button is released or the
memorycard is full.
O •
Frame advance rates of 10 fps or faster are available only when
s ELECTRONIC SHUTTER is selected for A SHOOTING SETTING >
SHUTTER TYPE .
•
If fi le numbering reaches 9999 before shooting is complete, the re-
maining pictures will be recorded to a new folder.
•
Shooting ends when the memory card is full; the camera will record
all photos shot to that point. Burst shooting may not begin if the
space available on the memory card is insuffi
cient.
•
Frame rates may slow as more shots are taken.
•
Frame rate varies with the scene, shutter speed, sensitivity, and focus
mode.
•
Depending on shooting conditions, frame rates may slow or the fl ash
may not fi re.
•
Recording times may increase during burst shooting.
Exposure
To vary exposure with each shot, select OFF for D BUTTON/DIAL
SETTING > SHUTTER AE .
N
Depending on such factors as aperture, sensitivity, and exposure com-
pensation, exposure may not be adjusted automatically.