FujiFilm X-S10 Mirrorless Camera User Manual
Page 127
103
5
T
a
k
ing Phot
og
raphs
Flash Photography
Flash Settings
The following settings are available with the built-in fl ash.
ADJUST
END
MODE
Built-In Flash
Setting
Setting
Description
Description
A
Flash control mode
Choose from the following options:
•
TTL
: TTL mode. Adjust fl ash compensation (
B
) and choose
a fl ash mode (
C
).
•
M
: The fl ash fi res at the selected output (
B
) regardless of
subject brightness or camera settings. Output is expressed
in fractions of full power, from ⁄ to ⁄. The desired results
may not be achieved at low values if they exceed the limits
of the fl ash control system; take a test shot and check the
results.
•
C
(primary fl ash)
: Choose if the fl ash is being used as a pri-
mary fl ash controlling secondly fl ash units, for example as
part of a studio fl ash system.
•
D
(OFF)
: The fl ash does not fi re.
B
Flash compensation/
output
Adjust fl ash level. The options available vary with the fl ash
control mode (
A
).