FujiFilm X-S10 Mirrorless Camera - Manual (Page 338)

314
T
echnical Not
es
12
Connections
Problem Problem Solution Solution
The monitor is blank.
The camera is connected to a TV: Pictures will be displayed
on the TV instead of in the camera monitor (
P 276).
Both the TV and camera
monitor are blank.
Q Q EVF ONLY + EVF ONLY + E E is selected for VIEW MODE
SETTING : Put your eye to the viewfi nder or choose a
diff erent VIEW MODE SETTING option ( P 14).
No picture or sound
on TV.
•
The camera is not properly connected : Connect the camera
properly ( P 276).
•
Input on the television is set to “TV” : Set input to “HDMI”
( P 276).
•
The volume on the TV is too low : Use the controls on the tele-
vision to adjust the volume ( P 276).
The computer does not
recognize the camera. Be sure the camera and computer are correctly connected
(
P 281).
FUJIFILM X RAW STUDIO
or FUJIFILM X Acquire
fails to correctly detect
the camera.
Check the option selected for CONNECTION MODE
on the camera. Select USB RAW CONV./BACKUP
RESTORE before connecting the USB cable ( P 285).
Cannot connect to
iPhones or iPads.
ON is selected for USB POWER SUPPLY SETTING . Se-
lect OFF when the camera is connected via a Lightning
connection to a device that do not supply power ( P 238).
Cannot connect to
smartphone.
Confi rm that the camera is correctly connected : The procedure
for connecting the camera varies with the type of connec-
tor with which the smartphone is equipped (
P 286).