HP Z2 G9 Tower Workstation - Manual (Page 5)

QuickSpecs
HP Z2 G9 Tower Workstation Desktop PC
Overview
c08109687 — DA 17012 – Worldwide — Version 13 — November 1, 2022 Page 5
Front I/O 2 Type-A SuperSpeed USB 10Gbps signaling rate port (1 charge port supports up to 5V/2.1A), 2 Type-A
SuperSpeed USB 10Gbps signaling rate port, 1 Type-C SuperSpeed® USB 20Gbps signaling rate port
(charge supports up to 5V/3A, optional), 1 SD card reader (optional), 1 universal audio jack
Internal I/O [5] (1) Hi-Speed USB 480Mbps signaling rate header for SD card reader
(1) serial port available with header
(1) serial and PS/2 available with header
Rear I/O 2 DisplayPort 1.4 [3], 1 Audio Line out, 1 Audio Line in, 1 RJ-45, 3 Hi-Speed USB 480Mbps signaling rate
port, 2 Type-A SuperSpeed USB 10Gbps signaling rate port, 1 Type-A SuperSpeed USB 5Gbps signaling
rate port, 1 serial (optional), 1 Flex I/O port (VGA, HDMI 2.0b, DisplayPort 1.4, Type-C® SuperSpeed USB
10Gbps signaling rate port (Power Delivery 15W, Alt Mode Display Port), Dual Tye-A SuperSpeed USB
5Gbps signaling rate port, 2nd 1GbE LAN, 1 Thunderbolt 3 with SuperSpeed/USB4 Type-C® 40Gbps
signaling rate (cabled to PCIe AIC), 1 1Gbps Fiber LC NIC
Optional I/O Flex IO* – choose one of the following options: 1 DisplayPort ™ 1.4, 1 HDMI 2.0b, 1 VGA,1 2nd 1GbE LAN,
1 1Gbps Fiber LC NIC, 1 Dual SuperSpeed USB Type-A 5Gbps signaling rate,1 SuperSpeed USB Type-C®
10Gbps signaling rate (15W USB Power Delivery, Alt Mode DisplayPort
™ ) 1 Thunderbolt ™ 3 with
SuperSpeed USB4 Type-C® 40Gbps signaling rate (cabled to PCIe® AIC); Front - 1 SuperSpeed USB Type-
C
®️ 20Gbps signaling rate (1 charging), 1 SD card reader; Rear – 1 serial; Front – choose one of the
following options: 1 SuperSpeed USB Type-C ®️ 20Gbps signaling rate (1 charging), 1 SD 4.0 card reader
*Flex IO port and one PCIe slot will be occupied when Thunderbolt is installed. Thunderbolt will be
available in Q2, 2022 (1
st refresh).
Interfaces Supported SD card reader (optional)
On-board RAID Support SATA and NVME RAID 0 Striped Array
SATA RAID and NVME RAID 1 Mirror Array
Chassis Dimensions (H x
W x D) H: 14" [356mm]
W: 6.7" [169mm]
D: 15.2" [385mm]
Packaged Dimensions H: 20.39" (518mm)
W: 11.61" (295mm)
D: 19.29" (490mm)
Rack Dimensions 4U
Weight Exact weights depend upon configuration (System weight only).
Starting at 6.2kg (13.7lbs.)
Temperature
Operating: 5° to 35° C (40° to 95° F)
Above 1524 m (5,000 feet) altitude, the maximum operating temperature is reduced by 1° C (1.8° F) for
every 305 m (1,000 feet) increase in elevation
Non-operating: -40° to 60° C (-40° to 140° F)
Maximum rate of change: 10°C/hr
Humidity Operating: 10% to 85% RH, non-condensing, 35° C maximum wet bulb
Non-operating: 10% to 90% RH, non-condensing, 35° C maximum wet bulb
Maximum Altitude (non-
pressurized)
6
Operating (with Rotational Hard Drives): 3,048 m (10,000 feet)
Operating (with only Solid-State Drives): 5,000 m (16,404 feet)
Non-operating: 12,192 m (40,000 feet)
Maximum operating temperature is reduced as altitude increases. See
Temperature for details.
Power Supply 700W wide-ranging, active Power Factor Correction, 92% Efficiency. 500W wide-ranging, active Power
Factor Correction, 90% Efficiency. 450W wide-ranging, active Power Factor Correction, 90% Efficiency.
350W wide-ranging, active Power Factor Correction, 92% Efficiency.
NOTE: The Power Supply Efficiency Report for the 700W 92% Efficiency, 500W 90% Efficiency, 450W
90% Efficiency and 350W 92% Efficiency Power Supply may be found at the following links:
700W PSU: