Denon AVR-A1H 15.4-Channel Network A/V Receiver - Manual (Page 228)

n Layout
Set the speaker layout when installing 1 set (2-channels) of Height, Ceiling or Dolby Atmos Enabled speakers.
The layouts that can be selected differ depending on the combinations of “Assign Mode” and “Floor” in the menu. (“Assign Mode” (
v p. 224),
“Floor” ( v p. 226))
[2-channel heigh speakes]
Settings AUDIO OUT connectors
Height Sp Dolby Sp Layout HEIGHT 1 HEIGHT 2 HEIGHT 3 HEIGHT 4
None None - - - - -
2ch None
Front Height Front Height - - -
Top Front Top Front - - -
Top Middle Top Middle - - -
Top Rear Top Rear - - -
Rear Height Rear Height - - -
None 2ch
Front Dolby Front Dolby - - -
Surround Dolby Surround Dolby - - -
Back Dolby z Back Dolby z - - -
z This can be selected when using Surround Back speakers. Set “Floor” in the menu to “5ch & SB” or “5ch & SB & FW”. ( v p. 226)
Contents Connections Playback Settings Tips Appendix
228
Front panel Display Rear panel Remote Index