Denon AVR-A1H 15.4-Channel Network A/V Receiver - Manual (Page 234)

o Bi-Amp
When “Assign Mode” is “13.1ch (Bi-Amp)” and “11.1ch (Bi-Amp) +
ZONE2”, the PRE OUT connector used for the bi-amp connection of
the front speakers is displayed. Depending on the settings of “Floor”
and “Height” - “Layout”, the connector is determined automatically.
HEIGHT 3:
The HEIGHT 3 speaker terminal is used
for the bi-amp connection of the front
speakers.
HEIGHT 2:
The HEIGHT 2 speaker terminal is used
for the bi-amp connection of the front
speakers.
FRONT WIDE:
The FRONT WIDE speaker terminal is
used for the bi-amp connection of the
front speakers.
SURROUND BACK:
The SURROUND BACK speaker
terminal is used for the bi-amp
connection of the front speakers.
o Front B
When “Assign Mode” is “13.1ch + Front B”, the PRE OUT connector
used for the second front speakers is displayed. Depending on the
settings of “Floor” and “Height” - “Layout”, the connector is determined
automatically.
HEIGHT 3:
The HEIGHT 3 speaker terminal is used
for the second front speakers.
FRONT WIDE:
The FRONT WIDE speaker terminal is
used for the second front speakers.
SURROUND BACK:
The SURROUND BACK speaker
terminal is used for the second front
speakers.
Contents Connections Playback Settings Tips Appendix
234
Front panel Display Rear panel Remote Index