Denon AVR-A1H 15.4-Channel Network A/V Receiver - Manual (Page 56)

o Example layout for Auro-3D 11.1 channel
system
This speaker configuration is optimized for Auro-3D playback.
FL FR
SW SR SL C
FHL FHR
CH
SHL SHR
TS
For each speaker connection, refer to the following.
0
“Connecting speakers to the speaker terminals” ( v p. 43)
0
“Connecting an external power amplifier” ( v p. 44)
0 Set “Floor” - “Layout” to “5ch” and “Height Sp” to “6ch” in the menu when
connecting in this configuration. ( v p. 226)
Next, set “Height” - “Front Layout” to “Front Height & Center Height” and “Middle
Layout” to “Surround Height & Top Surround”. ( v p. 229)
FR FL C SR SL FHR
SW1
FHL SHR SHL CH TS
0
To use two sets of height speakers with a center height and top surround
speakers, connect the center height and top surround speakers to the HEIGHT 3
connector.
0 For the best Auro-3D experience Surround Height speakers are recommended,
however you may substitute Rear Height speakers from a Dolby Atmos speaker
setup in place of Surround Height speakers.
Contents Connections Playback Settings Tips Appendix
56
Front panel Display Rear panel Remote Index