Denon AVR-A1H 15.4-Channel Network A/V Receiver - Manual (Page 51)

Connecting 9.1-channel speakers
o Example layout when using surround back
and front wide speakers
FL
SW C
SL
FR
SR
SBR SBL
FWL FWR
For each speaker connection, refer to the following.
0
“Connecting speakers to the speaker terminals” ( v p. 43)
0
“Connecting an external power amplifier” ( v p. 44)
0 Set “Floor” - “Layout” to “5ch & SB & FW” in the menu when connecting in this
configuration. ( v p. 226)
o Example layout when using surround back
and one set of height speakers
C
FL FR
SBL SBR
SW SL SR
FHL FHR
For each speaker connection, refer to the following.
0
“Connecting speakers to the speaker terminals” ( v p. 43)
0
“Connecting an external power amplifier” ( v p. 44)
0
Set “Floor” - “Layout” to “5ch & SB” and “Height Sp” (or “Dolby Sp”) to “2ch” in the
menu when connecting in this configuration. ( v p. 226)
0 You can change the Front Height Speakers to any Height/Ceiling/Dolby Atmos
Enabled speakers in the “Amp Assign” - “Layout” setting. ( v p. 228)
Contents Connections Playback Settings Tips Appendix
51
Front panel Display Rear panel Remote Index